Active methods of mercury removal from flue gases

Due to its adverse impact on health, as well as its global distribution, long atmospheric lifetime and propensity for deposition in the aquatic environment and in living tissue, the US Environmental Protection Agency (US EPA) has classified mercury and its compounds as a severe air quality threat. Such widespread presence of mercury in the environment originates from both natural and anthropogenic sources. Global anthropogenic emission of mercury is evaluated at 2000 Mg year⁻¹. According to the National Centre for Emissions Management (Pol. KOBiZE) report for 2014, Polish annual mercury emissions amount to approximately 10 Mg. Over 90% of mercury emissions in Poland originate from combustion of coal.

The purpose of this paper was to understand mercury behaviour during sub-bituminous coal and lignite combustion for flue gas purification in terms of reduction of emissions by active methods. The average mercury content in Polish sub-bituminous coal and lignite was 103.7 and 443.5 μg kg⁻¹. The concentration of mercury in flue gases emitted into the atmosphere was 5.3 μg m⁻³ for sub-bituminous coal and 17.5 μg m⁻³ for lignite. The study analysed six low-cost sorbents with the average achieved efficiency of mercury removal from 30.6 to 92.9% for sub-bituminous coal and 22.8 to 80.3% for lignite combustion. Also, the effect of coke dust grain size was examined for mercury sorptive properties. The fine fraction of coke dust (CD) adsorbed within 243–277 μg Hg kg⁻¹, while the largest fraction at only 95 μg Hg kg⁻¹. The CD fraction < 0.063 mm removed almost 92% of mercury during coal combustion, so the concentration of mercury in flue gas decreased from 5.3 to 0.4 μg Hg m⁻³. The same fraction of CD had removed 93% of mercury from lignite flue gas by reducing the concentration of mercury in the flow from 17.6 to 1.2 μg Hg m⁻³. The publication also presents the impact of photochemical oxidation of mercury on the effectiveness of Hg vapour removal during combustion of lignite. After physical oxidation of Hg in the flue gas, its effectiveness has increased twofold.

     

Particulate matter on two Prunus spp. decreases survival and performance of the folivorous beetle Gonioctena quinquepunctata

Woody plants growing along streets and construction sites play an important role in removing harmful particulate matter (PM). Researchers rarely consider the impact of different types and size fractions of PM deposited on the leaves on insect folivores. We determined differences in the accumulation of cement and roadside PM on the leaves of two Prunus species (P. padus and P. serotina) with different leaf surface structures. We also determined the effect of PM on the beetle Gonioctena quinquepunctata, the main pest of these plants. Saplings were artificially dusted in greenhouses and leaves were utilised for larval and adult insect stages feeding in laboratory conditions. Road PM accumulated in greater amounts than did cement PM, regardless of plant species. For both PM sources, P. padus accumulated twofold more than did P. serotina. Insect survival was negatively affected by PM pollution; however, neither Prunus species nor PM source variant significantly affected masses of larvae and pupae, duration of larval and pupal development or relative growth rates. The experiment showed strong negative influences of PM were noted only for adult insects, due to the grazing period being longer than that in larvae. The mass of adult insects and the efficiency of conversion of ingested food (ECI) were lower for insects exposed to PM than those for control insects. Insects compensated for lower ECI by eating a greater total amount of food (TFE). Adult insects gained significantly higher mass when fed with P. serotina than with P. padus. The effect of PM on analysed plant metabolites was insignificant. Only Prunus sp. and date of collection affected the level of condensed tannins and total phenols. Our results indicate that, when investigating the effect of the host plant on folivore performance, the accumulation of PM, as well as its type and quantity, should be taken into account.

     

Vehicle Hydrocarbons’ Emission Characteristics Determined Using the Monte Carlo Method

Environmental Modeling & Assessment - Hydrocarbons (HCs) are products of incomplete combustion process which can occur during operation of the internal combustion engines (Flagan and Seinfeld...     

Geostatistical 3-dimensional integration of measurements of soil magnetic susceptibility

In soil magnetometry, two types of measurements are usually performed. The first type is measurements performed on the soil surface, frequently using an MS2D sensor. The second type includes measurements of magnetic susceptibility carried out in the soil profile, usually to a depth of about 30 cm. Up to now, such measurement results were analyzed separately. However, it is possible and advantageous to integrate these two types of measurements. The goal of the study was to integrate measurements of magnetic susceptibility performed on the soil surface and in the soil profile. More specifically, the goal was to obtain 3-dimensional spatial distributions of magnetic susceptibility of the topsoil horizon. Results show that it is possible to effectively integrate measurements of magnetic susceptibility performed on the soil surface and in the soil profile. Moreover, the 3-dimensional spatial distribution that is obtained shows the magnetic susceptibility of the top 20 cm of soil, which includes the soil horizons where most of the heavy metals are accumulated. The analysis of such a spatial distribution can be very helpful in delineating areas where the heightened magnetic susceptibility is a result of the influence of anthropogenic pollution from those areas where it results from lithogenic origin. It is possible to investigate where the volumes of soil with heightened magnetic susceptibility are located in the soil profile and in this way investigate which characteristic type of soil profile it is.     

Contamination of Polish national parks with heavy metals

The paper presents results of screening analysis of all Polish national parks (23) contamination with Cd, Cu, Pb and Zn on the basis of a three-level characteristic of heavy metal presence in Norway spruce stands: accumulation on the needle surface, concentration of heavy metals in spruce needles and concentration of bioavailable heavy metals in the soil. Based on the obtained results, the classification of forest ecosystem hazard in national parks with heavy metals was made using synthetic indicators. It was found out that Babiogórski, Magurski, Ojcowski and Gorczański National Parks, located in the southern part of the country, were the most polluted with heavy metals. It is probably due to a higher industrial activity in this part of Poland and the transboundary transport of air pollutants. A little lower level of pollution was observed in Kampinoski National Park located in the middle of the country. The concentration of heavy metals found in needles from national parks does not seem to be harmful for the health status of the trees. Statistically significant correlation between all parameters, which was found for cadmium--the most mobile of the analysed elements--shows that this metal can be proposed as a marker to reflect present effect of industrial emission on forests.     

Adsorption of Remazol Red 198 onto magnetic N-lauryl chitosan particles: equilibrium, kinetics, reuse and factorial design

Purpose

The discharge of colored effluents from industries is an important environmental issue and it is indispensable to remove the dyes before the water gets back to the rivers. The magnetic adsorbents present the advantage of being easily separated from the aqueous system after adsorption by positioning an external magnetic field.

Methods

Magnetic N-lauryl chitosan (L-Cht/??-Fe₂O₃) particles were prepared and characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, transmission electron microscopy, and vibrating sample magnetometry. Remazol Red 198 (RR198) was used as a reactive dye model for adsorption on L-Cht/??-Fe₂O₃. The adsorption isotherms were performed at 25°C, 35°C, 45°C, and 55°C and the process was optimized using a 2³ factorial design (analyzed factors: pH, ionic strength, and temperature). The desorption and regeneration studies were performed in a three times cycle.

Results

The characterization of the material indicated that the magnetic particles were introduced into the polymeric matrix. The pseudo-second order was the best model for explaining the kinetics and the Langmuir?CFreundlich was the best-fitted isotherm model. At room temperature, the maximum adsorption capacity was 267?mg?g^?1. The material can be reused, but with a decrease in the amount of adsorbed dye.

Conclusions

L-Cht/??-Fe₂O₃ is a promising material to remove RR198 and probably other similar reactive dyes from aqueous effluents.     

Sulfadimethoxine and sulfaguanidine: their sorption potential on natural soils

Sulfonamides (SAs) are one of the oldest groups of veterinary chemotherapeutic agents. As these compounds are not completely metabolized in animals, a high proportion of the native form is excreted in feces and urine. They are therefore released either directly to the environment in aquacultures and by grazing animals, or indirectly during the application of manure or slurry. Once released into the environment, SAs become distributed among various environmental compartments and may be transported to surface or ground waters. The physicochemical properties of SAs, dosage and nature of the matrix are the factors mainly responsible for their distribution in the natural environment. Although these rather polar compounds have been in use for over half a century, knowledge of their fate and behavior in soil ecosystems is still limited. Therefore, in this work we have determined the sorption potential of sulfadimethoxine and sulfaguanidine on various natural soils. The influence on sorption of external factors, such as ionic strength and pH, were also determined. The sorption coefficients (K_d) obtained for the sulfonamides investigated were quite low (from 0.20 to 381.17 mL g⁻¹ for sulfadimethoxine and from 0.39 to 35.09 mL g⁻¹ for sulfaguanidine), which indicated that these substances are highly mobile and have the potential to run off into surface waters and/or infiltrate ground water. Moreover, the sorption of these pharmaceuticals was found to be influenced by OC, soil solution pH and ionic strength, with higher K_d values for soils of higher OC and lower K_d values with increasing pH and ionic strength.     

Bioaccumulation of selected metals in bivalves (Unionidae) and Phragmites australis inhabiting a municipal water reservoir

Urbanization can considerably affect water reservoirs by, inter alia, input, and accumulation of contaminants including metals. Located in the course of River Cybina, Maltański Reservoir (Western Poland) is an artificial shallow water body built for recreation and sport purposes which undergoes restoration treatment (drainage) every 4 years. In the present study, we demonstrate an accumulation of nine metals (Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, Zn) in water, sediment, three bivalve species (Anodonta anatina, Anodonta cygnea, Unio tumidus), and macrophyte Phragmites australis collected before complete drainage in November 2012. The mean concentrations of metals in the sediment, bivalves, and P. australis (roots and leaves) decreased in the following order: Fe > Mn > Zn > Cu > Cr > Ni > Pb > Co > Cd. A considerably higher bioconcentration of metals was observed in samples collected from the western and southern sites which undergo a higher degree of human impact. Sediments were found to be a better indicator of metal contamination than water samples. Interspecific differences in levels of metal accumulation were found between investigated unionids. U. tumidus accumulated higher levels of Cr, positively correlated with ambient concentrations, predisposing this species as a potential bioindicator of this metal in aquatic environments. On the other hand, species of Anodonta genus demonstrated higher accumulation of Cu and Cd. Positive correlations were found between Pb content in the sediments and tissues of all three bivalve species. In P. australis, metals were largely retained in roots except for Cd and Pb for which higher concentrations were found in leaves suggesting additional absorption of these metals from aerial sources. P. australis and bivalve from the Maltański Reservoir may be a potential source of toxic metals for animals feeding upon them and contribute to further contamination in the food chain.     

Insects perceive local sex ratio in the absence of tactile or visual sex-specific cues

Numerous studies have demonstrated adaptive behavioral responses of males and females to changes in operational sex ratio (the ratio of potentially receptive males to receptive females; OSR), and theory often assumes that animals have perfect instantaneous knowledge about the OSR. However, the role of sensory mechanisms in monitoring the local sex ratio by animals and whether animals can perceive local sex ratio in a manner consistent with model assumptions have not been well addressed. Here, we show that mating water striders Gerris gracilicornis respond to local sex ratio even when visual and physical contact with other individuals were experimentally prohibited. Our study shows that insects are able to estimate local population's sex ratio and adjust their behavior based on nonvisual cues perceived at a distance or released to the habitat. Hence, the frequent theoretical assumption that individuals have knowledge about their local sex ratio regardless of their direct behavioral interactions may be an acceptable approximation of reality.     

Sorption of ionic liquids onto soils: experimental and chemometric studies

Chemometric analyses are a great tool to support typical experimental studies of the interactions of xenobiotics with natural environment. Such interpretations are able to determine statistically significant correlations and finally lead to identification of the major sorption factors. However, to effectively use chemometrics a bigger data set is required. Even though the ionic liquids are intensively studied, their complete fate or prediction of their behavior in the natural environment is still unclear. Therefore, to evaluate and distinguish the patterns of interactions of ILs in soil environment by chemometrics, sorption of nine ionic liquids (imidazolium and pyridinium chlorides) on 11 types of various soils was tested. Experimental studies indicated that compounds with longer alkyl side chains were sorbed far more strongly than weakly lipophilic ones. Moreover, salts with short and/or hydroxylated derivatives were more mobile in soils/sediments and thus, might cause a danger of contamination of surface or ground waters. Cluster analysis revealed that ionic liquids form two major clusters according to interaction with soil surface - one grouping compounds with short and hydroxylated alkyl side chains and the second with the rest of compounds. Pairwise scatterplots for correlations between soil variables and sorption coefficients indicated that the main soil parameter responsible for the sorption was cation exchange capacity. Correlation of sorption coefficients, K(d), with pH indicated the existence of lower sorption potency in lower pH values.